Gunsstory

 Forgot password?
 register
Search
View: 596|Reply: 7

How to set the parameters for printing?

[Copy link]

4

Threads

10

Posts

140

Credits

1LT

Rank: 2

Credits
140
Post time 2020-9-15 11:19:15 | Show all posts |Read mode
How to set the parameters for printing?
Reply

Use magic Report

0

Threads

62

Posts

1290

Credits

Administratimor

Rank: 9Rank: 9Rank: 9

Credits
1290
Post time 2020-9-15 11:39:45 | Show all posts
Layer height 0.15-0.2 Filling 40%-60% Speed 45-55 Temperature 190 pla
Reply

Use magic Report

4

Threads

10

Posts

140

Credits

1LT

Rank: 2

Credits
140
 Author| Post time 2020-9-15 11:40:47 | Show all posts
thx      
Reply

Use magic Report

0

Threads

4

Posts

180

Credits

1LT

Rank: 2

Credits
180
Post time 2020-9-15 20:11:11 | Show all posts
Edited by Nostalgia at 2020-9-15 20:12

when you finish printed all parts, for example m1911, does it fit perfectly when you assembly it immediately or do you have to polish it by using a file ?. i'm just curious, am i put setting on wrong set ? or maybe it's still need some work in order all parts fit nicely.
Reply

Use magic Report

0

Threads

62

Posts

1290

Credits

Administratimor

Rank: 9Rank: 9Rank: 9

Credits
1290
Post time 2020-9-15 21:31:19 | Show all posts
Nostalgia replied at 2020-9-15 20:11
when you finish printed all parts, for example m1911, does it fit perfectly when you assembly it imm ...

you need sand off a little bit. Cause sometimes they don’t match up very well.
Reply

Use magic Report

0

Threads

19

Posts

440

Credits

Administratimor

Rank: 9Rank: 9Rank: 9

Credits
440
Post time 2020-9-15 21:38:46 | Show all posts
Nostalgia replied at 2020-9-15 20:11
when you finish printed all parts, for example m1911, does it fit perfectly when you assembly it imm ...

Im so sure that you need some extra work to put all parts together. When I finished mine. I usually use 240 grit sand paper to sand all around the the parts with water. Then it turned out amazing.
Reply

Use magic Report

293

Threads

679

Posts

7600

Credits

COL

Rank: 8Rank: 8

Credits
7600
Post time 2020-9-25 13:52:43 | Show all posts
Is it possible in this thread to clarify what kind of plastic these models were printed with? Will ABS shrinkage need to be calculated?
Reply

Use magic Report

293

Threads

679

Posts

7600

Credits

COL

Rank: 8Rank: 8

Credits
7600
Post time 2020-9-25 23:38:19 | Show all posts
zvc replied at 2020-9-15 11:39
Layer height 0.15-0.2 Filling 40%-60% Speed 45-55 Temperature 190 pla

If you raise the fill to 100% won't it be worse?
Reply

Use magic Report

You have to log in before you can reply Login | register

Points Rules

Gunsstory

2021-8-5 16:39 GMT+8 , Processed in 0.075461 second(s), 19 queries .

Quick Reply To Top Return to the list